G.M.H. Associates of America, Inc

 

 

 

Home Page

 

 Services / Equipment

 

Engineer Rate Sheet

 

Job Sites

 

Contact Us

 

Products and Services G.M.H offers:

Water and Waste Water Equipment Clarifier, Thickener, Flocculator, Stationary Bar Screens, RBC drives,

Rotary Distributor / Trickling Filter Systems, Plastic Media, Authorized Distributor of U.S. Tsubaki Chain and Sprockets,

Digester Covers, Mixing Systems, Heating Systems, Fiberglass Products - flights, weirs, baffles, tanks, etc,

Aerators Both Floating and Fixed Mounted, Standby/Emergency Generator Systems,

Trickling Filter and Cooling Tower Media Packing, Seals, and Gasket Material,

Squeegees, Stiffeners and Hardware, Belt Filter Presses & Conveyors,

 Bulk and Material Handling Motorized valve actuators.

Plastic chain, sprockets,  Odor Control Tank Covers

Pumps & Controls, Comminutors

 

Equipment and Vehicles

 

Trucks / Cranes / Trailers

1.     #32 - 2011 Chevrolet Silverado Service Truck with  misc. tools

2.     #39 - 2011 Chevrolet Silverado Service Truck with misc. tools

3.     #40 - 2010 Ford F350 Super Duty Crew Cab Utility Truck with welder and misc. tools

4.     #41 - 2010 Ford F350 Super Duty Crew Cab Utility Truck with welder and misc. tools

5.     #46 - 2007 Chevrolet Silverado Service Truck

6.     #47 - 2007 Chevrolet Silverado Service Truck

7.     #48 - 2007 International 4200 Utility Truck with

8.     #45 - 2006 International 4200 Utility Truck with

9.     #43 - 2002 International 4600 Flatbed Crane

10.     #50 - International 40 Ton Crane

11.   #36 - 1994 International Utility truck with three welders, 5ton Crane

12.   #35 - 1993 International Utility truck with two welders/generators

13 .  #51 - Mack 14 Ton Crane

14.   #44 - International 4600 Vactor

15.    1981 Freightliner 80,000# GVW Tractor Trailer

16.    1974 International 80,000# GVW Tractor Trailer

17.  48 ft. flatbed trailer for 80,000# GVW tractor trailer.

18.  40 ft. flatbed trailer for 80,000# GVW tractor trailer.

19.  30 ft.1 35 ton capacity low-boy trailer for 80,000# GVW tractor trailer

20.  35 ft. flatbed tilt trailer with 50,000# capacity.    

 

Forklifts / Loaders

1.  20,000# Capacity Pettybone Fork Lift with Riggers Boom.

2.  10,000# Capacity Yale Fork Lift.

3.  4,000# Capacity Clark Fork Lift with Triple Mast and Riggers Boom.

4.  4,000# Capacity Clark fork lift.

5.  4,000# Capacity Electric Tight Quarters Fork Lift.

6. Case 680 CK Frontend Loader/Backhoe

  

Machine Shop Equipment

1.  28 x 120 Sydney Lathe.

2.  30 x 80 American Lathe.

3.  30 x 144 American Lathe.

4.  60 x 60 Bullard Horizontal Boring Mill.

5.  48 Bridgeport Vertical Milling Machine.

6.  48 Index Vertical Milling Machine.

7.  24 Radial Drill Press.

8.  36 Radial Drill Press.

9.  48 Radial Drill Press.

10.  48 Index Shaper with 14 stroke.

11.  50 ton capacity bearing press.

12.  60 Horizontal milling machine with vertical mill adapter.

13.  14 x 60 Rockwell Lathe.

14.  16 x 60 Turret Lathe.

14.  36" x 244" Baer and Emmes Lathe.

 

Pumps

1.   14 x 16 7.9 MGD 250 HP electric pump.

2.   6 30 HP Flygt submersible electric de-watering pump.

3.   6 20 HP Flygt submersible electric raw sewage pump.

4.   6 20 HP Flygt submersible electric raw sewage pump.

5.   4 10 Hp Flygt submersible electric pump.

6.   4 5 HP Flygt submersible electric de-watering pump.

7.   4 5 HP Flygt submersible electric de-watering pump.

8.   4 5 HP gould submersible electric raw sewage pump.

9.   4 3 HP 3 Phase Enpo Cornel Cutter/Grinder Pump.

10.  4 3 HP 1 Phase Empo Cornel Cutter/Grinder Pump.

11.  3 3 HP submersible electric pump.

12.  4 gas driven self priming pump.

13.  3 gas driven self priming pump.

14.  Numerous 1 to 2 submersible electric pumps.

15.  40 KW Diesel generator 220 volt, 3 phase.

16.  5 KW Diesel generator 220 volt, 3 phase/220 volt single phase

17 . 10 KW Gasoline generator 220/208 volt, single and 3 phase7 gasoline welder and 4 KW 220/110 volt    single phase generators.

 

Miscellaneous

1.  Concrete coring equipment to 6

2.  3 - Portable magnetic drills.

3.  Concrete drilling and jack hammering equipment.

4.  2 - 135 CFM air compressors for sandblasting and jack hammering.

5.  1 - 100 lb. Cap., 2 200 lb. Cap., 1 300 lb. Cap., 1 500 lb. Cap. Sandblaster Pot

 

  Current used drive inventory

   Dorr Oliver 80S1            Eimco C54B2                 Envirex H-36

   Dorr Oliver 80S2            Eimco 80P1                    Enelco 42PD   

   Dorr Oliver 96S2            Eimco C54B                   Horsburg-Scott 42"   

   Dorr Oliver 60S2            Eimco C72B                                    

   Dorr Oliver 60S1            Eimco C54B/C72

  DBS DH-60-20-2            Eimco C54B/C72

   Dorr Oliver 48S1            Eimco C54B2HD 

  Dorr Oliver 30S1                    

  Many more, call with specific request.

 

 

 

Clarifier and Thickener Hot-Bypass Capability

G.M.H. Associate of America, Inc. is offering a new procedure perfected and tested by us. This procedure has been used for many customers over the past 3 years in emergency situations. We call it the "Hot-Bypass".

Basically a Hot-Bypass for a clarifier or thickener is the use of strategically placed pumps, piping and controls to harvest sludge off the bottom of a clarifier/thickener while the flow continues and the clarifier/thickener remains on line.

This procedure has been used for emergency bypass when a catastrophic drive failure would have otherwise required clarifier/thickener shutdown and subsequent plant shut down. Further it has been used for maintenance work such as drive replacement when normal procedures would have required clarifier/thickener shut down and subsequent plant shut down. This procedure has been proven time and again with out any problems on start-up or in process.

It should be noted that our "Hot Bypass" experience has shown us that effluent turbidity quality can degrade an average of 50% to 100% during the "Hot Bypass" procedure. (This would mean for a secondary clarifier with an original effluent turbidity of .1 PPM to could go to between .15 and .20 PPM) Further sludge density can degrade an average of 100% to 300%.(This would mean for a secondary clarifier with an original underflow of 3.5% solids could go to 1.75% to 1.16% solids) Further please note that on several occasions the actual effluent numbers got better so it is entirely dependent on system specifics and we can only estimate qualities.

These procedures come from actual projects for which we can give references on request.

We specialize in clarifier, thickener and trickling filter drive and mechanical retrofits, repairs, upgrades and new installations.